Tamprinter Pneumatic Clamp Screen Stretcher
Technical Parameter:
Place of Origin |
Guangdong, China (Mainland) |
| Dimension(L*W*H) |
300*600mm |
| Chuck Length |
300mm |
| Length of Stroke |
75mm |
| Air Pressure |
0.5-0.7Mpa |
| Pulling Force |
20~25N |
| N.W.(kgs) |
4kgs/single cylinder |
| Stretching Area(mm) |
Freely Combined |
| Model Number |
TM-CL1 |
Steps
1. First, according to the size of the grid frame to adjust the area, and then lock the casters
2. Select the appropriate frame support to place it on the web
3. Adjust the handwheel, so that the distance between the cutting edge of the frame in the 5-6mm, in order to avoid the process of pulling the net due to increased yarn tension, the network box to withstand the yarn and cause yarn break.
4. flatten the mesh, with a net clip to fix the edge of the net yarn, and then slowly rotating the four sides of the rack hand wheel, so that the yarn slowly in the tension state, so repeated until the tension throughout the yarn Equal to the size of the tension to sum up the mesh and the size of the mesh, the net is better after the best use of tension meter for the final inspection, Note: the yarn tension can not be pulled once, must be separated several times, such as: Force requirements 40n, first pulled 15n, after a minimum of 5 minutes after the stay, only to pull 20n so repeatedly pull the net can.
5. Adjust the handwheel, so that the network box to rise, pay attention to the network box evenly contact the yarn, and then in the network box and mesh contact with the place coated with vine gum, Note: must wait for dry, And remove with the yarn.
6. After the other stretch, pull the valve, so that the hand wheel back to the initial position, turn off the power.
1) hand wheel; when the hand wheel to the left rotation, the yarn is in tension, when the hand wheel to the right when the yarn is in a relaxed state.
2) the activities of casters; when you want to adjust the area of the net pull the net when the first release casters, screws
3) fixed feet; the entire cable machine fixed support.
4) the head screw; when you want to adjust the position of the hand wheel in the rack, first release the screw, in order to fix the hand wheel.
5) Rack
6) net folder; in the pull yarn, for the four sides of the fixed yarn, in order to facilitate the use of screen to achieve the best.
7) frame support frame
8) universal handle; when adjusting the net pull the net area of the machine, the first release on the four sides of the universal handle, in order to adjust the cable machine, so that the cylinder on the four sides of the box on the diagonal.
Feature
1. Netting chuck and frame all made of special aluminum alloy production, to ensure that after the deformation is not.
2. Chuck with a new design of the self-locking net folder structure, high tension after not slip network, not loose.
3. The chuck can be slid left and right to ensure uniform tension.
4. Single-sided pull-line hand wheel through the tooth chain synchronous transmission power, to ensure single-sided chuck tension synchronization.
5. Top net using pneumatic lift, flexible and reliable.
Product Image
Welcome to contact us if you have any question.
Audited Supplier 
){kind=link}
){kind=link}