TM-50dg Galvanized Stainless Steel Screen Printing Drying Racks
|FOB Price:||US $130 / Piece|
|Min. Order:||1 Piece|
|Min. Order||FOB Price|
|1 Piece||US $130/ Piece|
|Production Capacity:||300 Sets/Month|
|Payment Terms:||L/C, T/T, Western Union, Paypal|
- Model NO.: TM-50DG
- Atomization: Pressure Atomization
- Heating Mode: Transmission
- Drying Medium: Air
- Operational Method: Continuous
- Transport Package: Plywood Case/Wooden Case/Carton/as Required
- Origin: China(Mainland)
- Movement Way: Combined
- Flow: Contra-Flow
- Material Status: Bulk
- Operation Pressure: Atmospheric Pressure
- Trademark: Tamprinter
- Specification: 1100X750X1480mm
- HS Code: 8443192900
This feature permits drying utilization of the full shelf size. Each shelf spring is individually adjustable to control the up/down tension operation. The powder coated shelf finish is rust and solvent resistant for a long service life. The shelves are spaced at 1" intervals to maximize solvent evaporation. Models are available where 2" spacing is required and so are heat resistant models for oven applications.
This screen printing dry racks are suitable for storing flat substrates after screen printing such as t shirts, AD, paper, PCB, plastic plate and etc.
1. Professional design for multi applications
2. Move freely with rubber or metal wheels
3. Stand with coating finish
3. Spring tension arms hold the shelves in any convenient position
4. Special size is acceptable
The following prices MOQ 50 sets
|Grid size||The number of support points||USD/SET|
|The ordinary conventional 50 layer||Galvanization||100mm X 100mm||3||140|
|Screen:1000mm*650mm||120mm X 120mm||3||130|
Drying trolley, use for spray tray stand apart each layer trough spray baking line, put baking furnace baking finish again to hang back to the Drying trolley,move to different department, convenient, durable, price is low.
Thousand layer cart
You have to explicit your own demand of Drying-Racks before bargain with us :
1, made of stainless steel or galvanized, galvanized several times cheaper.
2, go into the oven or not into the oven, the wheels is not the same, oh, oh $ 10 price difference.
3, the outer layer of ordinary routine 50 Size: 1100 * 750 * 1450mm Mesh Size: 1000 * 650mm 4.6 * 2.4 lines, carrying 1 kg. Gross vehicle weight of 60 kg. If custom 1000 * 800mm mesh, looks figures almost, doubled to 120 kg weight on it.
4, wire mesh welding thin dense degree of usually refers to a mesh width, there are 100 * 100mm and 120 * 120mm
5, pay attention to see, front 3 fulcrum 2 fulcrum more expensive 5 dollars
6, the key is to determine the load-bearing ,also affects wire mesh thickness and the price.
Please contact us for more information!