|Convey belt width (mm)||380||730||880||980||1180|
|Effective range (mm)||400||750||900||1000||1200|
|Max thickness of cured (mm)||40||40||40||40||40|
|Conveying speed (m)||2~20||2~20||2~20||0~25||2~20|
|UV lamp (KW*pcs)||3||5.6*2||5.6*2||5.6*2||5.6*2|
|Driving power (W)||60||90||90||120||120|
|Lamp length|| ||826|| ||1050|| |
TM-UV750 UV curing machine 2.55m*1.05m*1.45m
Plywood 2.7m*1.2m*1.8m about 6m³
input 850+shade 200+tunnel 700+shade 200+output 550=2500mm
Distance from Handrail to ground 820mm
Distance from belt to ground 790~810mm can be adjusted
It is apply to the special effects such as wrinkle, frosted refraction gem crystal and convex oil on the bullion paperboard, metal, glass, plastic, and also the UV curing of the offset printing ink on the offset press production.
1. With Teflon or stainless steel net, transmit speed steady and can be adjusted.
2. With two UV lighting tubes, can turn on the light according to the need.
3. Wink-dry make the surface of the stocks high hardness and rub resistance.
4. Tunneling-based make the whole machine light barrier good and without harm.
5. Equipped with powerful nether induced draught system and big intake airway, can absorbs the stock on the mesh belt hard. It can be used with production line and other equipment easily.
When machine in working have problem how to deal with it. Answer: Please sent us email first and tell us what the problem is. This is the standard machine, it's performance is very nice.
Even have question those will be below question. you can check first by yourself.
Q1, UV light can not light on.
A1: Check the electricity have connect in to machine. The indicator of power will showed red light. Than operate as manual showed.
Q2, UV light on, Belt stopped not run.
A2: Turn on the lamp quickly and waiting for machine power off automatically. (Our machine have function Only need turn off light the machine will turn off automatically.) Than Check the Motor of conveyor which under the unloading side of belt. If this question replace a new one. Check the Speed control: Change a new one if the new one worked. We will shipment a extra speed controller Marched with the machine when we package in each shipment.
Q3, The light twice again and gain than not light.
A3: Check your power supply is 220V +/_5% 50HZ, If Below 220V over the range of +/-5%, so keep your power supply steady. (our standard, any different will be the machine we signed in purchase).
Q4, The light can not dry completely to product ( UV ink, UV glue, UV varnish, UV coating and so on)
A4: The lamp average lifetime is 800hours. if over this pls replace a new one. (We suggest when you purchase our UV machine, also purchase a new extra lamps as replacement) If a new lamp, than check the ignitor, transformer, and lamp they connect line is well connected. Especially the lamp line. there is screw in, if it is loosen. pls stick it lightly.
If find any parts need replacement , than within one year Guarantee we supply by free.
Also you can purchase a new one out of Guarantee.
We supply all parts of our machine. including: UV lamp, Transformer, Capacitor, Trigger, ignitor, reflector,
Quartz, adapter, Phase protector, speed control, Speed motor, Exhausting fun, Air out tube ......
Welcome to contact us if any question.