Bottle Flame Treatment Machine with Automatic Ignition and Product Dwell and Simultaneous Rotation Fit Air-Gas Burner

• After-sales Service: 1
• Warranty: 1
• Flame Area: 25~250mm
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: TM-F3
• Height of Work Piece: 25-250 Mm
• Bottle Mouth Diameter: 12-24mm
• Conveyer Size: 230mm
• Output: 1800~3000PCS/Hr
• Conveyer Transfer Speed: 0-10m/Min
• Compress Air: 6 Bar
• Fuels for Flame Processor: Liquefied Petroleum Gas
• Power Supply: AC 380V/ 50Hz, 3-Phase
• Machine Dimension: 2200X1200X700 Mm (Lxwxh)
• Transport Package: Plywood Case/Wooden Case/as Required
• Specification: CE
• Trademark: Tamprinter
• Origin: Guangdong, China
• HS Code: 8419399090
• Production Capacity: 50sets/Month
• Package Size: 220.00cm * 120.00cm * 70.00cm
• Package Gross Weight: 200.000kg

Product Description

TM-F3  Bottle flame treatment machine with automatic ignition and product dwell and simultaneous rotation fit Air-Gas burner

Vider link: http://tamprinter.en.made-in-china.com


Technical parameters

lame area	25~250mm
Height of work piece	25-250 mm
Bottle mouth diameter	12-24mm
Conveyer size	230mm
Output	1800~3000Pcs/Hr
Conveyer transfer speed	0-10m/min
Compress air	6 bar
Fuels for flame processor	liquefied petroleum gas
Power supply	AC 220V/ 50Hz, 1-Phase
Machine dimension	2200X1200X700 mm (LXWXH)
Machine weight	155 KG

Operational issues
1.This machine uses 220V power supply, and combustible gases, and compressed by the compressor air ventilation when using the machine and away from danger highly flammable areas where conditions permit the best equipped with fire fighting equipment!
2.The machine has a certain degree of risk, please pay attention to safety when using operator and the operator has certain associated processing consciousness! 


Boot steps:
1. Plug 220V power supply, and pass on the combustible gas and compressed air , the air pressure is about 3-4KG around ! Followed by seeing, hearing, smell and other methods to check whether there is leakage of the place , check Do not use open flame check , to avoid danger , you can use soapy water to check for leaks ! Checked and then wipe to dry!
2.Open the emergency stop switch power to start the governor , confirmed a few weeks to let the whole operation and commissioning of the sharp turn running OK , and then press the combustible gas switch , and then try to turn on the combustible gas flame gun switch, ( just started not too wide ) then the ignition , allowing the flames to light , and then slowly open the air switch, and gas -switch synchronous adjustment , adjusted to the blue flames 
On behalf of the flame has been adjusted , press workpiece speed and running speed , try to adjust the position of both sides of the flame , the flame come into contact with the surface, quickly through !
3. Tables under a pressure regulator , a pressure regulator only on behalf of the combustible gas meter , and the other is an air pressure adjustment table , generally regulated at 3-4KG so on it !
4. Configure the emergency stop switch , under any circumstances , press the emergency stop switch, the machine will stop , but the machine is stopped, the combustible gas will shut down, but for safety reasons, turn off the gas main switch should be relatively synchronized properly !
5. When the work is shut down , turn off the combustible gas switch , first extinguish the flame , the flame gun surface is heat, please do not touch , so as not to burn , you can allow free air circulation for some time and then turn off the air ! In order to achieve the cooling effect ! From work and want to turn off the power switch, and combustible gas master switch for safety !

Packaging & Delivery
Packaging Detail: Plywood case
Delivery Detail: 1-2weeks
The 2 spark flame treatment machine is use for pre-treatment PP
And PE bottle surface before printing.

Company Information

Tamprinter printing machinery group limited is one of the most professional special printer supplier of Plastic Field in China. We have supplied OEM service for the domestic counterparts since 2005. OEM products have been achieved CE certification.
Key products: Pad printer, Screen printer, UV curing machine, Heat transfer machine. 
Major market: America market.
Applications:
     It mainly applies to the printing process and pre-postpress of plastic and hardware products .Our equipment is also applicable to other material as  glass, ceramic, wood, leather, cloth, etc.
Involved in the industry:
    Electronics, toys, gifts, clothing, stationery, cosmetics, washing products, chemicals, food, health product, pharmaceutical and packaging etc.
Advantages:
1. All the electrical components and control system are from Germany and Japan, guarantee the stable quality of the print.  
2. Multi-purpose microcomputer operating panel and touch screen operation can easily achieve man-machine dialogue.
3. As high quality steel frame structure and High temperature  of the lacquer that bake, so that our printer is light and solid, beautiful and practical.
    Our first-class products and considerate services have won more than 80 countries, acceptance in Europe and the United States, Canada, Southeast Asia, the Middle East and other customer, and we enjoyed a high reputation in the market.  We cooperate with Omron, Emerson and Ruigao light, which are the world famous enterprises.