Portable Drying Machine

• Customization: Available
• Movement Way: Combined
• Atomization: Pressure Atomization
• Model NO.: TM-UV-100-2
• Flow: Parallel Flow
• Heating Mode: Radioactive
• Material Status: Strap
• Drying Medium: Superheated Steam
• Operation Pressure: Atmospheric Pressure
• Operational Method: Continuous
• Power Supply: 220V
• UV Lamp Power: 2000W
• Main Wave Length: 365nm
• UV Radiation Length: 140mmx400mm
• UV Lamp Lifetime: 800 Hour
• UV Case Size: 420mmx410mmx810mm
• Best Radiation Distance: 75-150mm
• Total Net Weight: 35kg
• The Life of The Bulb: 800-1200 Hour
• Transport Package: Wooden Case
• Specification: CE
• Trademark: Tamprinter
• Origin: China (Mainland)
• HS Code: 8443192290
• Production Capacity: 60 Sets/Month

Product Description

TM-UV-100 portable uv curing machine video
http://tamprinter.en.made-in-china.com

Technical Parameters

Model No.	TM-UV-100-1	TM-UV-100-2
Power supply	220V	220V
UV lamp power	1000w	2000w
Main wave length	365nm	365nm
UV radiation length	140mmX400mm	140mmX400mm
UV lamp lifetime	800 hour	800 hour
UV case size	490mmX410mmX670mm	420mmX410mmX810mm
Best Radiation distance	75-150mm	75-150mm
Total Net weight	25KG	35KG

Product Image










3kw Mercury Lamp Dry Pegmentalne Red Colors Need About 8 Sec,black Ink Longest, 
transparent Uv Varnish Shortest,also Can Use Gallium Lamp

Product name
Portable UV Curing Machine

Item    
TM-UV-100-2kw

Details
Portable UV curing machine for UV glue, UV ink, UV test. 
Application for UV repair, wood floor UV curing, Wall corner UV curing which the big UV machine can not cure. 

Features
Small size with light weight,
Portable design, one lamp, easy operation. 
One side and multi-side curing flexible controlling.
Special for test(UV ink, UV oil, UV painting, UV coating )
Economic style with steady performance.
control  system
It is used to control the whole light solid machine work system
please kindly note
1,Fan control by the best temperature automatic control (see right-hand chart), because there may be omissions control by people, also is not accurate enough.
2,This boot should first turn on the light, 2 to 3 minutes to open the fan (fan is not temperature control, this time for the UV machine had been set before shipment).
3,Should take the fan continues to run after shutdown, until the lamp and body cooling.
4,The second starting to wait until completely cooling tubes starting. 

ventilating system
It consists of fan, air duct, the wind mask. Here is that should be paid attention to the choice of fan and air volume control and ventilation.
1,The selection of the fan according to the UV lamp power and the actual situation of housing space. General distribution and convulsions two wind turbines, but I have only small UV machine equipped with a ventilation fan. Fan power is not enough that leads to exhaust air temperature inside the case, lamp life shortened, melt, even also make curing product quality difficult to guarantee; Air volume of fan power if too large, will make the temperature inside the case is too low, the UV lamp can't work at full power, curing is not easy to dry 
2,Exhaust way refers to take the lead wind supply air or air supply on the wind, etc. But either way, not the wind blows directly to the UV lamp, because the consequences of doing so is to make the UV lamp for heat loss is too big and not full power work (changed from white to not dazzling light blue), make the ink doesn't dry.

Payment Terms
TT/LC/western union

If you have any question, please contact us!