Tam-LED-800 Energy Saving Long using life LED UV Light Source Curing Machine
Specifications
| Input voltage |
AC220-240 - V |
| Cooling way |
Forced water cooling |
| Water-cooled machine size |
470 mm * 260 mm * 260 mm |
| Belt width |
800mm teflon |
| Power |
1600W |
| Size |
2*980*1.1m |
| Wire and pipe size |
5 m |
| UV LED band |
365 nm, 395 nm |
| UV LED light intensity |
365 nm (1200 MW/cm2-1600 MW/cm2)
395 nm (2800 MW/cm2-3600 MW/cm2) |
| Effective radiation area |
75 mm * 25 mm |
| Warranty |
2 years warranty |
| Import of vertical structure light source:The Taiwan chip, quartz lens encapsulation, 120-200 - w, small size, high power, fast curing |
LED UV dryer:
1.LED UV curing system
2.Speed:0~15m/min
3.Power:300W per 4 Modular.
4.More than 20000 hours using life
Application:
It is apply to the special effects such as wrinkle, frosted refraction gem crystal and convex oil on the bullion paperboard, metal, glass, plastic, and also the UV curing of the offset printing ink on the offset press production.
Features:
1.With Teflon or stainless steel net, transmit speed steady and can be adjusted.
2.With two UV lighting tubes, can turn on the light according to the need.
3.Wink-dry make the surface of the stocks high hardness and rub resistance.
4.Tunneling-based make the whole machine light barrier good and without harm.
5.Equipped with powerful nether induced draughe system and big intake airway, can absorbs the stock on the mesh belthard.It can be used with production line and other equipment easily.
Control mode:
A key switch:To control the light output on/off.
Adjustable power set:UV energy using the infinite set arbitrary between 0-100%.
Intelligent protection:Intelligent temperature and water flow cut-off alarm protection, temperature alarm value can be set, and water power.
UV LED light source characteristics:
1.No solvent - the greenhouse effect.
2.Conducive to environmental protection.
3.The work sites and no pollution.
4.Quick production.
5.Room temperature curing.
6.Product has unique properties.
7.To save energy.
8.Easy to wash.
9.Save space.
10.High gloss.
11.Less waste.
12.Method diversity, adaptability, product replacement fast.
While traditional mercury lamp calorific value is big, need special exhaust system, and the curing of heat sensitive material application is restricted.Light intensity on mercury lamp (point or bar) as the center showed a trend of decreasing step by step, uneven illumination, lead to products not consistency, reduce product percent of pass.
Tip:We can manufacture according to customer's requirement.
Application Scope:
This is a newest products and newest Technology, main for UV ink curing(LED UV INK and normal type UV ink), low power,save 90% Electricity than normal type UV curing machine(14KW), LED UV curing machine power just have 480W !!!
At the same time, this UV LED have a very long using life time,more than 20000 hour.
Advantage of UV LED:
1.High efficient and low temperature, prevent material to deformation or turn to yellow;
2.Convenient to install on any of the existing drying equipment;
3.Ultra low energy consumption, electricity saving 80%~90%;
4.Long using life, curing once turn it on,need't to wait, stable light source;
5.Effective curing the common UV ink, do not need to replace Special ink, the same efficiency;
6.Green environmental protection, low noise, no ozone, no mercury pollution, no heat radiation;
7.With 2 years warranty
Comparison of LED UV and traditional UV light source:
Item |
LED UV light source (1m width,3 groups LED UV light,480W/group) |
Traditional light source
(1m width,2 set UV lamps, 5.6KW/lamp) |
Using life |
Over 20000 hours |
Around 800 hours |
Machine power |
1.6KW |
14KW |
Electric cost |
Around 832 USD per year |
Over 7280 USD per year |
Based on 3120hours/year,electric price 0.167USD/Kw. |
Based on 3120hours/year,electric price 0.167USD/Kw. |
Maintenance costs |
0 USD/year |
700 USD/year |
Within using life |
Change UV lamps 4 times per year |
Cost saving |
At least save 7148 USD/year |
Audited Supplier 
){kind=link}