| Transport Package: | Plywood |
|---|---|
| Specification: | 3200*1020*2500mm |
| Origin: | China(Mainland) |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier TM- 3DUV -2 Hexahedron 3M Universal Primer treatment machine
Parameter:
Belt Width Size: 400mm
Conveyor belt Stainless SUS304
Maximum speed: 0~ 12m/min
Power : 380V/50HZ/3P 24Kw
Top Exhause Pipe Diameter: 200mm
If Clean room, oven inside about 65 celsius
Machine net Weight: 1230kg
Machine Size: 3200*1020*2500mm about 11CBM
Lamp Lifetime about 1000 hours
Application nylon + fiber, PET, EVA,PP glass, ceramic, etc.
Plywood Packing
Payment Terms T/T , LC
Stock :20sets color Red ,white or blue random delivery
Product Image:
In order to ensure the tension between the EVA, IP, PHYLON midsole and the rubber outsole or upper material, it is necessary to do water washing and UV irradiation treatment before the sole is added or formed (EVA does not need to be washed)
Water washing: The function of water washing is to wash off the chemical residues such as release agent/release agent on the surface of IP and PHYLON, so that it can more fully interact with the treatment agent. There are three procedures for washing: 1. Over alkaline liquid PH 10.5~11.5, temperature 55±5ºC; 2. Neutral water cleaning PH 6~8, temperature 45±5ºC; 3. Acidic liquid PH 2.5~3.5, temperature 55 ±5°C. It takes about 5-6 minutes to complete the washing process. During the washing process, the side that needs to be attached to IP and PHYLON should face down so that they can fully contact with the washing liquid. After washing with water, directly pass through the oven (the far right end of the picture below, the temperature is 50ºC) to dry IP and PHYLON.
UV irradiation: UV irradiation is required after washing with water. You need to wipe the cleanser first, fully clean it, and open the pores on the surface. After drying in an oven at 50±5ºC for 2 minutes, then wipe the UV treatment agent. The role of the treatment agent is to "anchor", fill in small pores, and change the affinity of the material surface for better adhesion to the glue. The treatment agent needs to be dried in an oven at 50±5°C for 2 minutes. Then directly into the UV irradiation, UV irradiation can trigger a polymerization reaction to increase the polarity of the sole, enhance the viscosity and adhesion, and make the sole easier to stick. If not irradiated, insufficiently irradiated, or expired, the pull force value is low and can be easily pulled by hand. (Please note that glue cannot directly adhere to the IP and upper).
application
This machine is suitable for the molding of shoe materials such as EVA and MIDE. The UV treatment agent is wiped on the shoe material. After being dried, it is irradiated by an ultraviolet UV irradiator. The UV light causes the treatment agent to generate free radicals and initiates the polymerization reaction. The shoe material has been increased in polarity, making it easy to adhere
Characteristic
1. Apply to shoe materials that need to be irradiated on both sides.
2. The upper and lower layers are independently controlled and can be used for single-side illumination.
3. High output, saving more than 1,000 pairs per hour.
4. Labor-saving, traditional machines require twice-irradiated shoes, and the machine is completed at one time.
5. Special style design, low temperature, avoid EVA foam deformation.
6. Newly increased independent freezing area, lower internal temperature, shoe material irradiation is more stable.
New detection function
1. When the lamp fails to light normally, it will immediately alarm and display the position of the faulty lamp.
2. Each light has its own strong and weak light control, which makes the operation easier.
3. When the UV system fails, the warning light flashes and the conveyor belt stops.
CE:
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}