Good Quality UV Drying Heater for Silk Screen Printing

• Movement Way: Combined
• Atomization: Gas Atomization
• Flow: Contra-Flow
• Heating Mode: Transmission
• Material Status: Powder
• Drying Medium: Air
• Model NO.: TM-UV-F2
• Operation Pressure: Atmospheric Pressure
• Operational Method: Continuous
• Power: 380V 3phase
• UV Lamp: 2PCS*8kw
• Insert Width (mm): 850
• From Belt to Ground: 400mm
• Weight (Kg): 500
• Electric Control Box Size: 60*97*99cm
• Body Size: 270*110*135cm
• Offset Print Speed (PCS/H): 3000
• Dimension: According to Your Offset Printing Machine
• Warranty: 1 Year
• Transport Package: Plywood Case/Wooden Case/as Required
• Specification: CE
• Trademark: Tamprinter
• Origin: China(Mainland)
• HS Code: 8443198000
• Production Capacity: 50sets/Month

Product Description

 TM-UV-F2 Good quality UV drying heater for Silk Screen Printing 
TM-UV-F  offset UV dryer video:
http://tamprinter.en.made-in-china.com


This machine is offset Postpress drying equipment,
Heidelberg offset printer UV dryer equipment,
Man Roland offset printing machine UV dryer,
Dion 450 offset print machine UV tunnel
Komori offset print UV unit
and so on or a printer supporting.
offset printing machine supporting
 
1, Weight:                              500 (Kg)  
2,Total power:                       2*5.6kw or 2*8kw+90w(5k)  
3, Belt width:                         800mm
4, Body size:                          283*139*159cm
5,Electric control box size: 82*70*113cm

Type	TM-UV-F1	TM-UV-F2	TM-UV-F3	TM-UV-F4	TM-UV-F5
Power	380v 3phase	380v 3phase	380v 3phase	380v 3phase	380v 3phase
UV Lamp	2pcs*5.6kw	2pcs*8kw	4pcs*8kw	3pcs*9.6kw	2pcs*9.6kw
Insert width (mm)	850	850	1100	1100	620
Insert depth (mm)					900
Distance from belt to ground (mm)	400	400	820	820	450
Weight (Kg)	500	500	1000	1200	700
Electric control box size(cm)	60*97*99	60*97*99	no	60*97*99	60*97*99
Body size (cm)	270*110*135	270*110*135	400*135*145	400*135*145	400*135*145
offset print speed (pcs/h)	2000	3000	6500	6500	6000
Sheet size (mm)					520x360
					2group Transformer can controll stepless adjust lamp brightness 30%~100%

Dimension: outline size customized according to your offset printing machine,  
Butt paper receiving port width height and depth size etc., then to determine the size of UV machine. you must provide 2D drawing.
Machine can be redesigned according to your specific requirements.
 





Features:
(1) With teflon or stainless street net, trasmit speed steady and can be adjusted (0-70m).
(2) With two UV lighting tubes, can turn on the light according to the need.
(3) Wink-dry make the surface of the stocks high hardness and rub resistance.
(4) Tunneling-based make the whole machine light barrier good and without harm.
(5) Equipped with powerful nether induced draught system and big intake airway, can absorb the stock on the mesh belt hard.
(6) Can be used with production line and other equipment easily.
Special UV machine of printing machine: Exact design, complete function, stable performance, each switch is obvious and easy to distinguish, simple and convenient operation, optimal high quality printing machine connecting UV solidifying machine and best partner of Heidelberg, Man Roland and Komori and so on. 
Quality, special design, and advantages of main parts: 
(1)Adopt imported UV light tube, and have long useful time, and more stable wavelength. 
(2)Adopting glisten film made in Germany and installing specially designed focused lampshade can promote UV energy effectively, and make the solidifying ability of the machine stronger. 
(3)Exclusive design of ultralow temperature of irradiated area makes printing heat sensitive paper, film, and 0.05mm thin film not become deformed, and reprint exact. 
(4)The machine adopts specially designed heat removal system, drops off UV heat, and also does not lower UV energy, makes materials stable, does not float, stop, trap in the light chest 
(5)Light source is divided into bright light, middle light, and dim light, unattached switch allocating energy-saving leakage transformator produced by the factory make the energy of UV light exert to the highest-level, meanwhile save electric power changes. 
(6)The machine is equipped with transformer and overtemperature protection device of lighting tube. 
(7)Divided design (fuselage is separated from mainframe) is easy to operate, and can be pushed. 
(8)The machine prints with printing machine at the same time: discharge velocity of rapid solidifying is 70m per minute(mph 6000 pieces of paper). 
(9)The machine has many types, and can be made to order according to the requirements of customers, the solidifying speed is 5-70m/min and can be adjusted.

 
Company Information:
Tamprinter printing machinery group limited is one of the most professional special printer supplier of Plastic Field in China. We have supplied OEM service for the domestic counterparts since 2005. OEM products have been achieved CE certification. 
Due to business expansion, Shenzhen Tamprinter printing machinery limited International trade department have been separated from the parent company in March 2013. 
Key products: Pad printer, Screen printer, UV curing machine, Heat transfer machine. 

Business scopes: 
1. Research, develop, produce and sell: Pad printer, Screen printer, Heat transfer machine, Hot stamping machine, Pre-post printer(UV curing machine, Flame treatment machine, UV exposure clich machine, Coating emulsion machine, Silk mesh tighten machine, Screen stencil drying oven, Silk screen frame exposure machine, Steel pad plate oven, IR oven, IR drying tunnel conveyer ); 

2. Trade and authorize for the patent of the above products, Services about design, testing, maintenance, and technical consulting; 

3. Valet Manufacture: flame treatment gun, screen frame, Screen Stencil, pad, steel plates, film, Drying Racks Trolley and the relative moulds, jigs and parts; 

4. Sale by proxy the relative supporting materials: printing ink, Ink Adjustment tool, Rubber pads Materials, Pad Printing Blade, ink cup and ring, Pad holder, ink roller, Screen Silk, Aluminium Screen Frame, Rubber Squeegee, sensitive emulsion, Emulsion Coating tool, Etching powder, Sensor Switch, Tension meter, Spraying gun, Circuit board, Inkwell, Solenoid Valve, hot stamping foil, High temperature tape, Stamp plate, Silicon rubber roller, Heat transfer paper, High temperature glue, UV lamp, UV lamps Trigger etc; 

5. Our engineer can communicate with clients at anytime in English, design development use UG, Proe, Autocad, Mastercam; 

6. Import and export business of the above items.
 
  Applications :
      It mainly applies to the printing process and pre-postpress of plastic and hardware products .Our equipment is also applicable to other material as  glass, ceramic, wood, leather, cloth, etc.

Involved in the industry:
       Electronics, toys, gifts, clothing, stationery, cosmetics, washing products, chemicals, food, health product, pharmaceutical and packaging etc.
  Advantages :
1. All the electrical components and control system are from Germany and Japan, guarantee the stable quality of the print.  
2. Multi-purpose microcomputer operating panel and touch screen operation can easily achieve man-machine dialogue.
3. As high quality steel frame structure and High temperature  of the lacquer that bake, so that our printer is light and solid, beautiful and practical.
     Our first-class products and considerate services have won more than 80 countries,  acceptance in Europe and the United States, Canada, Southeast Asia, the Middle East and other customer, and we enjoyed a high reputation in the market.  We cooperate with Omron, Emerson and Ruigao light, which are the world famous enterprises.