Printing Plate Drying Oven

• Customization: Available
• Type: Pre-Post Printing Accessories
• Operational Method: Manual
• Model NO.: TDP-70100
• Classification Performance: Hot Air Circulation Oven
• Air Supply: Horizontal
• Condition: New
• Working Time: 0.5-2h
• Usage: Plastic Testing Machine
• Drying Method: Heating Drying Method
• Certificate: CE
• Max Plate Size: 900*1200mm
• Power: 380/50 or 20/50 Hz
• Transport Package: Plywood
• Specification: 1500*1200*1100MM
• Trademark: Tamprinter
• Origin: China(Mainland)
• HS Code: 8443192900
• Production Capacity: 150 Sets/Month

Product Description

TDP-70100 Vacuum stencil dryer with drawer for screen printing machine 

P.S Stencil dryer Fit for TMP-70100 screen printer


Parameter

MOLDE	TDP-70100	TDP-6090	TDP-90120	TDP-12140
MAX PLATE SIZE(mm)	900*1200	800*1000	1100*1400	1400*1600
power(v/hz)	380/50 or 20/50	380/50 or 220/50	380/50 or 20/50	380/50 or 20/50
power(kw)	4*1kw	4*1kw	5*1kw	6*1kw
Heating pipe	stainless steel	stainless steel	stainless steel	stainless steel
Temperature	0~200deg	0~200deg	0~200deg	0~200deg
Timer	0.5~2 H	0.5~2 H	0.5~2 H	0.5~2 H
machine size	1500*1200*1100	1400*1100*1100	1400*1700*1100	1700*1900*1100
weight	150kg	100kg	200kg	250kg
plywood	about 3.1 CBM	about 2 CBM	about 4 CBM	about 4.2 CBM

 
Applicable Scope and advantage 

Screen printing drying cabinet is applied to drying the screen plate. 
This drying cabinet inside installed axial flow fan makes the hot air in circulation, which guarantees an equal temp in cabinet and can improve drying efficiency meanwhile The axial flow fan can normally be used for about 20,000 hours. It usually takes 2~4 minutes to well dry the screens coated with the photosensitive emulsion 

Feature

1,Hot air circulation system ensure constant temperature,save energy, compared with traditional 7000~8000W drying cabinet, this equipment can save power 3%~4% . 
2,CNC control system ,make the operation easily. 
3,The specification could be made as customers requirement








Steps:

1, turn on the power switch, indicator light.
2, adjust the required temperature.
3, the workpiece flat on the grid in the box, and then open the electric switch to meet the requirements, remove the product.
4, after drying the product, should cut off the power.


Note:

 1, according to the screen version of the temperature, the oven version of the maximum temperature can only reach 70 degrees to 100 degrees under normal circumstances, set the temperature of 65 degrees is appropriate.
2, the actual operation, due to room temperature and switch drawer and other factors, the instrument set the temperature and the actual instrument temperature may be 2-3 degrees difference, is a normal phenomenon, does not affect the machine.
3, the instrument used in a variety of machines in the power off and then re-use, the machine is still restored to the last time before the closure of the set
4, the reference data: the set temperature of 65C, the use of photosensitive paste single layer drying time For about 2 minutes, drying is not linked to the pulp slurry version of the time for about 1 minute.
Maintenance instructions:
1, the machine installation should be smooth, without shaking.
2, pumping out the grid should be flat pumping, and keep the grid clean.