China Best UV Curing Oven for Shoes UV Glue

• Movement Way: Combined
• Atomization: Gas Atomization
• Flow: Contra-Flow
• Heating Mode: Radioactive
• Material Status: Powder
• Drying Medium: Ultraviolet
• Model NO.: TM-UV420
• Operation Pressure: Radiation
• Operational Method: Continuous
• Inlet Length: 620mm
• Inlet Height: 100mm
• Oven: 1200mm
• Outlet Length: 620mm
• Belt Width: 420mm
• UV Lamp: 6kw/4 PCS
• Power(V/Kw): 220V Single Phase
• The Height From Ground to Belt: 800mm
• Structure: Oven
• Appearance of Dried Sample: Pastes
• Transport Package: Iron/Plywood
• Specification: CE
• Trademark: Tamprinter
• Origin: Guangdong, China
• HS Code: 8443198000
• Production Capacity: 100sets/Month

Product Description

TM-UV420  China best UV Curing Oven for Shoes UV Glue

Parameters:
 

Inlet length	620mm
Inlet height	100mm
Oven	1200mm
Outlet length	620mm
Belt width	420mm
UV lamp	8kw/4 pcs
The height from ground to belt	800mm
Power(v/kw)	220V single phase

 
The treatment agent is wiped on the shoe material, dried and irradiated with ultraviolet rays, and the photo initiator splits to generate free radicals, which initiates the polymerization reaction, so that the polarity of the shoe material is increased, and the stickiness of the shoe material becomes easy.

Application:
 
UV Curing Machine TM-700UVF-A be fit to  UV curing drying for Shoes, plastic, Paper , pvc, PP Sheets, wooden floor board ,UV POLISHING , PVC,PET , PCB  after printing UV printing, electronic product UV spraying ,  UV printing, packing products UV drying .

 
 
UV Curing Oven Characteristics
 
1.  uv curing oven has 4 suits of 8KW independent control UV systems, which can be used interchangeably in order to extend the service life of UV lamp.
 
2. Teflon belt to bear high temperature. 


3. Driven by well-known motor, stepless speed adjustment. The Conveyor speed can be adjusted according to product's characteristics.
 
4. UV lamp with high-quality light source, long life. It is able to start instant, rapid access to the normal UV brightness.
 
5. Electrical components are imported from Taiwan(Transformer, starter), precision Control, long life.
 
6.With ventilation function,it can quickly distribute heat quickly. Well-designed airflow cooling system to ensure that light generated minimum temperature, reduce rate of prodcut's deformation, improve lamp efficiency.
 
7. UV oven can ventilate and suction air reverse and simultaneously. For thin paper, PVC film, soft PCB,UV silicon gel etc, the UV curing effect is perfect.

 
 
UV Curing Oven Major Structure
 
1.Curing light source is made up by ultraviolet light lamp, irradiation devices, transformer etc.
 2. Fan heat removal system electrodeless speed change, speed controller drive belt.
 3.Cooling air circulation system
 


FAQ: 
When machine in working have problem how to deal with it. Answer: Please sent us email first and tell us what the problem is. This is the standard machine, it's performance is very nice. 
Even have question those will be below question. you can check first by yourself. 


Q1, UV light can not light on. 
A1: Check the electricity have connect in to machine. The indicator of power will showed red light. Than operate as manual showed. 


Q2, UV light on, Belt stopped not run. 
A2: Turn on the lamp quickly and waiting for machine power off automatically. (Our machine have function Only need turn off light the machine will turn off automatically.) Than Check the Motor of conveyor which under the unloading side of belt. If this question replace a new one. Check the Speed control: Change a new one if the new one worked. We will shipment a extra speed controller Marched with the machine when we package in each shipment. 


Q3, The light twice again and gain than not light. 
A3: Check your power supply is 220V +/_5% 50HZ, If Below 220V over the range of +/-5%, so keep your power supply steady. (our standard, any different will be the machine we signed in purchase). 


Q4, The light can not dry completely to product ( UV ink, UV glue, UV varnish, UV coating and so on) 
A4: The lamp average lifetime is 800hours. if over this pls replace a new one. (We suggest when you purchase our UV machine, also purchase a new extra lamps as replacement) If a new lamp, than check the ignitor, transformer, and lamp they connect line is well connected. Especially the lamp line. there is screw in, if it is loosen. pls stick it lightly. 
If find any parts need replacement , than within one year Guarantee we supply by free. 
Also you can purchase a new one out of Guarantee. 
We supply all parts of our machine. including: UV lamp, Transformer, Capacitor, Trigger, ignitor, reflector, Quartz, adapter, Phase protector, speed control, Speed motor, Exhausting fun, Air out tube .